Rack & Pinion Hoist

• Each 5 ft. galvanized mast section weighs just 95 lbs. and is easily installed with four bolts.
• Emergency upper & lower limit devices and separate emergency overspeed brake
• Optional floor-stops allow system to stop at preset levels
• Optional: Ground personnel safety alert - Material Hoist automatically stops 10 ft. above ground and horn sounds notifying workers below.
• Installation platform for installing & anchoring mast
• Mounting clamps available for attaching to scaffolding or anchoring to building
• Screw jacks for easy and fast leveling of base
• Controller is removable for easy service
• Optional roof enclosure is available

We carry high quality rack and pinion platform hoists to provide the construction industry with a reliable means of transporting material.  Powder coated for durability and weather resistant, these units can last in the outdoor environments for many years

Our hoists allow for transporting up to 2,000 pounds of material to up to 400 ft high. For situations where a cable hoist is too dangerous or just not enough, you can rely on these quality platform lifts. Powered by either 220-volt single phase or 230-volt three phase, there is one for any job site.

These hoists are light-weight and equipped with upper and lower limit switches, a fail safe brake (loss of power automatically sets the brake) as well as overspeed devices.. They are designed with reliability and safety in mind.